LA AUDIO DI2
$A 297.00
Active DI
- ¼" jack input
- ¼" jack linking output
- ¼" jack unbalanced output
- XLR balanced output
AKG H600
$A 286.00
Shock mount for gooseneck
- Designed for permanent installation of gooseneck modules
- Durable low profile plastic shell with a flexible inner rubber boot provides up to 20dB attenuation of structure-borne noise
- Included A608 locking clutch which grips the narrow section of the gooseneck and allows for height adjustments
- Mounting hole 53mmØ
NEATRON NHS777-OATW
$A 275.00
Omni Headworn Microphone for Audio-Technica
- Telescopic boom fits either side of headmount
- Electret condenser microphone capsule
- Polar pattern omnidirectional
- Frequency response 20Hz~20kHz
PROCO MS-3
$A 275.00
1x3 Microphone Splitter
- Split low-Z balanced microphone input between 3 mixers
- Balanced XLR female input
- 3 XLR male balanced mic-level outputs, 1 direct and 2 isolated
- Ground lift switches on isolated outputs
DBX RTA-M
$A 249.00
Reference Microphone
- Optional tool for dbx DriveRack series
- Flat frequency measurement microphone
- Frequency response 20Hz~20kHz
- Polar pattern omnidirectional
AUDAC CMX726T
$A 199.00
Headworn Omni Condenser Microphone
- Miniature condenser microphone capsule
- Polar pattern omnidirectional
- Adjustable microphone arm for head size
- Field replaceable lead
LD SYSTEMS WS100-MH1
$A 199.00
Headworn Microphone
- Condenser microphone on flexible boom
- Polar pattern cardioid
- Frequency response 100Hz~12kHz
- Weight 60g
PROCO DB1
$A 176.00
Passive DI
- Matches unbalanced music, line-level & speaker-level source to low-Z balanced microphone input
- ¼" input with parallel ¼" output
- Transformer-isolated dual XLR male balanced mic-level outputs
- Switches for high/low level attenuation, high-cut filter, & ground lift
LINE 6 HS70T
$A 170.00
Headworn microphone for XDV75
- Miniature condenser microphone capsule
- Polar pattern omnidirectional
- Adjustable microphone arm for head size
- Field replaceable lead fitted with TA4F connector
SHURE CVD-B
$A 165.00
Desktop Microphone Base for CVG Gooseneck
- Component of CVG18D-BC and CVG18DRS-BC Gooseneck microphones
- Angled XLR-F input connector
- 3.6m output lead terminated with XLR-M connector
- Dimensions WxHxD 110x55x158mm
AKG PS3F-LOCK
$A 149.00
XLRF Gooseneck Microphone Mount
- Panel mount connector for gooseneck microphones
- Integrated XLR-3F connector
- Integrated locking clamp
PROCO CB1
$A 143.00
Passive DI
- Matches unbalanced music & line-level source to low-Z balanced microphone input
- ¼" input with parallel ¼" output
- Transformer-isolated dual XLR male balanced mic-level outputs
- Ground lift switch
ATLAS-SOUNDOLIER MRB1
$A 135.00
Floor Receptacle
- Flush receptacle accomodates round female XLR style socket
- Cast brass lid and trim with brushed finish
- Dimensions WxHxD 110Øx65mm
- Weight approx 800g
PROCO LMX
$A 129.00
Mic/Line attenuator
- TRS Jack to 3-pin male XLR plug adaptor provides attenuated line level signal to low-Z mic input
- TRS jack socket input
- 3-pin XLR male output
ART AVDIRECT
$A 110.00
A/V direct box
- Inputs stereo RCA, ¼" TRS, ⅛" TRS & 100w speaker level
- Passive summed output on XLR socket
- Output transformer isolated balanced 150Ω microphone level
- Output level control
SHURE PGA48XLR
$A 109.00
Vocal microphone
- Polar pattern cardioid
- Incorporating a neodymium magnet for high output level
- Silent on-off switch
- Hardened steel mesh ball grille with integrated "pop" filter
SHURE PGA48XLR
$A 109.00
Vocal microphone
- Polar pattern cardioid
- Incorporating a neodymium magnet for high output level
- Silent on-off switch
- Hardened steel mesh ball grille with integrated "pop" filter
Audio Technica PRO 8HEcW
AUDIO-TECHNICA AT8444
$A 55.00
Mic clip for instrument
- Positions 10mm diameter microphone on acoustic guitar
- Variable length to position for desired sound
- Included with:
- Audio-Technica AT831B lapel microphone
SHURE WA371
$A 17.00
Microphone stand clip adaptor
- Flexible, break resistant
- For wireless microphones with 1¼" and larger handles including